ELASTO40NR Red Rubber Sheeting

Abrasion resistant, engineered for the mining industry

Elasto40nr Applications

  • Cyclones
  • Separators
  • Classifiers
  • Vessels & Chutes
  • Pipe Linings
  • Skirting

Elasto40nr Benefits

  • Resistant to abrasion
  • High resilience
  • Reduces corrosion
  • Vibration & noise absorbing

Roll Sizes

Metric Imperial
1.2m x 10m 4’ x 33’
1.4m x 10m 4.6' x 33’
1.5m x 10m 4.92' x 33’
Custom sizes available

Available Thickness

Metric Imperial
1-50mm 1/32” - 2”
TECHNICAL SPECIFICATION
PROPERTIES TEST METHOD VALUES (FPS UNITS) TEST METHOD VALUES (METRIC UNITS)
SPECIFIC GRAVITY ASTM D297 0.98lb/ft3 DIN 53508 1.02 g/cm3
HARDNESS ASTM D2240 40 ± 5 Sh A DIN 53505 40 ± 5 Sh A
TENSILE STRENGTH (min) ASTM D412 2100 PSI DIN 53504 150 kg/cm2
ELONGATION AT BREAK (min) ASTM D412 600% DIN 53504 600%
ABRASION RESISTANCE (max) ASTM D5963 120 mm3 DIN 53516 120 mm3
COMPRESSION SET(70˚C/24 hrs/25% set) (max) ASTM D395 METHODB 30% DIN 53517 30%
TEAR RESISTANCE (Angular) min ASTM D624 196 lbs/inch DIN 53515 35 kg/cm
RESILIENCE 75% 75%
CHANGE IN PROPERTIES
HEAT AGING (72 hrs at 70˚C) ASTM D573
HARDNESS (Pts) +5 (max) +5 (max)
TENSILE STRENGTH (%) +10 /-25 +10 /-25
ELONGATION AT BREAK (%) +10 /-25 +10 /-25
VOLUME SWELL:AT 70˚C FOR 72 HRS/IN ASTM D471
ASTM OIL NO.1 NOT RECOMMENDED NOT RECOMMENDED
ASTM OIL NO.2 NOT RECOMMENDED NOT RECOMMENDED
ASTM OIL NO.3 NOT RECOMMENDED NOT RECOMMENDED
CHEMICAL RESISTANCE
OZONE ASTM D1149 FAIR FAIR
DILUTE ACIDS AND BASES GOOD GOOD
CONCENTRATED ACIDS AND BASES FAIR FAIR
OILS NOT RECOMMENDED NOT RECOMMENDED
SOLVENTS NOT RECOMMENDED NOT RECOMMENDED
TEMPERATURE RANGE -40˚ to +80˚ C -40˚ to +80˚ C
COLOUR PINK PINK